Tidak dapat menginstal ulang VirtualBox di Ubuntu 16.04

8

Saya baru saja memutakhirkan ke Ubuntu 16.04 dari 15.10 dan VirtualBox saya tidak ingin memulai lagi. Saya mencoba membersihkan virtualbox, virtualbox-dkmsdan gelandangan dari sistem saya dan tampaknya berhasil (saya sama sekali bukan sysadmin btw, jadi tetap bodoh sederhana). Setelah saya menginstal ulang menggunakan DEB online atau menggunakan apt-getsaya mendapatkan ini pada akhirnya:

virtualbox.service - LSB: VirtualBox Linux kernel module
   Loaded: loaded (/etc/init.d/virtualbox; bad; vendor preset: enabled)
   Active: failed (Result: exit-code) since Sun 2016-04-24 20:22:47 EDT; 10min ago
     Docs: man:systemd-sysv-generator(8)

Apr 24 20:22:47 laptop-math systemd[1]: Starting LSB: VirtualBox Linux kernel module...
Apr 24 20:22:47 laptop-math virtualbox[6248]:  * Starting VirtualBox kernel modules
Apr 24 20:22:47 laptop-math virtualbox[6248]:  * modprobe vboxdrv failed. Please use 'dmesg' to find out why
Apr 24 20:22:47 laptop-math virtualbox[6248]:    ...fail!
Apr 24 20:22:47 laptop-math systemd[1]: virtualbox.service: Control process exited, code=exited status=1
Apr 24 20:22:47 laptop-math systemd[1]: Failed to start LSB: VirtualBox Linux kernel module.
Apr 24 20:22:47 laptop-math systemd[1]: virtualbox.service: Unit entered failed state.
Apr 24 20:22:47 laptop-math systemd[1]: virtualbox.service: Failed with result 'exit-code'.

Saya mencoba melihat dmesgtetapi saya tidak tahu apa yang harus saya buat dari tumpukan informasi ini dan saya ragu menyisipkan ini semua di sini layak untuk diperhatikan. Jika Anda tahu di mana saya harus mencari, akan dengan senang hati memasukkan sebagian dari itu!

Edit # 1

Memulai VBox dan mencoba menaikkan salah satu kotak gelandangan saya menunjukkan kepada saya bahwa saya seharusnya dijalankan modprobesebagai root. Saya mendapat pesan ini saat menjalankan sudo modprobe vboxdrv:

modprobe: ERROR: could not insert 'vboxdrv': Required key not available

Edit # 2:

Mengikuti saran dari seorang komentator, inilah yang saya percaya adalah 10 detik terakhir dmesgsetelah menjalankan modprobe vboxdrv:

[ 1900.105875] wlp3s0: deauthenticating from 74:44:01:31:82:6d by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1900.110727] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.110806] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.110887] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.110914] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.111289] pci_bus 0000:02: Allocating resources
[ 1900.111309] pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[ 1900.111314] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 1900.111335] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 1900.111347] pci_bus 0000:03: Allocating resources
[ 1900.111368] pcieport 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[ 1900.111372] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 1900.111384] pci_bus 0000:04: Allocating resources
[ 1900.111438] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.111445] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 1900.111467] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 1900.111471] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1900.111475] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1900.111479] pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1900.111483] pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1900.111487] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 1900.111491] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 1900.111494] pcieport 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 1900.111498] pcieport 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 1900.111513] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xea200000-0xea3fffff]
[ 1900.111532] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xea400000-0xea5fffff 64bit pref]
[ 1900.111549] pcieport 0000:00:1c.1: BAR 15: assigned [mem 0xea600000-0xea7fffff 64bit pref]
[ 1900.111556] pcieport 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[ 1900.111560] pcieport 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[ 1900.112366] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.112622] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1900.154945] cfg80211: World regulatory domain updated:
[ 1900.154948] cfg80211:  DFS Master region: unset
[ 1900.154949] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1900.154950] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1900.154952] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1900.154953] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 1900.154954] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 1900.154956] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 1900.154957] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 1900.154958] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 1900.154959] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 1900.774802] PM: Syncing filesystems ... done.
[ 1900.790627] PM: Preparing system for sleep (mem)
[ 1900.790777] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1900.792506] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1900.793654] PM: Suspending system (mem)
[ 1900.793670] Suspending console(s) (use no_console_suspend to debug)
[ 1900.794278] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1900.794322] sd 0:0:0:0: [sda] Stopping disk
[ 1901.246874] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[ 1901.382392] nouveau 0000:01:00.0: DRM: resuming client object trees...
[ 1901.382637] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 1901.382638] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 1901.382678] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 1901.383024] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 1902.022836] PM: suspend of devices complete after 1229.149 msecs
[ 1902.038534] PM: late suspend of devices complete after 15.689 msecs
[ 1902.040285] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 1902.040468] r8169 0000:04:00.2: System wakeup enabled by ACPI
[ 1902.040749] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 1902.040759] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 1902.054620] PM: noirq suspend of devices complete after 16.083 msecs
[ 1902.054823] ACPI: Preparing to enter system sleep state S3
[ 1902.242542] ACPI : EC: EC stopped
[ 1902.242542] PM: Saving platform NVS memory
[ 1902.242569] Disabling non-boot CPUs ...
[ 1902.243866] smpboot: CPU 1 is now offline
[ 1902.256010] smpboot: CPU 2 is now offline
[ 1902.267963] smpboot: CPU 3 is now offline
[ 1902.279906] smpboot: CPU 4 is now offline
[ 1902.290827] Broke affinity for irq 28
[ 1902.291837] smpboot: CPU 5 is now offline
[ 1902.306775] Broke affinity for irq 16
[ 1902.306779] Broke affinity for irq 17
[ 1902.306786] Broke affinity for irq 28
[ 1902.306787] Broke affinity for irq 30
[ 1902.307799] smpboot: CPU 6 is now offline
[ 1902.318717] Broke affinity for irq 1
[ 1902.318724] Broke affinity for irq 9
[ 1902.318728] Broke affinity for irq 12
[ 1902.318731] Broke affinity for irq 16
[ 1902.318735] Broke affinity for irq 17
[ 1902.318739] Broke affinity for irq 23
[ 1902.318742] Broke affinity for irq 28
[ 1902.318742] Broke affinity for irq 30
[ 1902.319757] smpboot: CPU 7 is now offline
[ 1902.335740] ACPI: Low-level resume complete
[ 1902.335787] ACPI : EC: EC started
[ 1902.335788] PM: Restoring platform NVS memory
[ 1902.336849] microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26
[ 1902.336897] Enabling non-boot CPUs ...
[ 1902.356018] x86: Booting SMP configuration:
[ 1902.356019] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1902.356852] microcode: CPU1 microcode updated early to revision 0x1c, date = 2015-02-26
[ 1902.359499]  cache: parent cpu1 should not be sleeping
[ 1902.359644] CPU1 is up
[ 1902.376075] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 1902.376809] microcode: CPU2 microcode updated early to revision 0x1c, date = 2015-02-26
[ 1902.379497]  cache: parent cpu2 should not be sleeping
[ 1902.379641] CPU2 is up
[ 1902.392116] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 1902.392821] microcode: CPU3 microcode updated early to revision 0x1c, date = 2015-02-26
[ 1902.395487]  cache: parent cpu3 should not be sleeping
[ 1902.395620] CPU3 is up
[ 1902.416194] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 1902.419155]  cache: parent cpu4 should not be sleeping
[ 1902.419298] CPU4 is up
[ 1902.436208] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 1902.439158]  cache: parent cpu5 should not be sleeping
[ 1902.439294] CPU5 is up
[ 1902.460290] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 1902.463338]  cache: parent cpu6 should not be sleeping
[ 1902.463483] CPU6 is up
[ 1902.480157] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 1902.483383]  cache: parent cpu7 should not be sleeping
[ 1902.483573] CPU7 is up
[ 1902.490537] ACPI: Waking up from system sleep state S3
[ 1903.368148] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 1903.368486] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1903.368656] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1903.368822] PM: noirq resume of devices complete after 15.637 msecs
[ 1903.369240] PM: early resume of devices complete after 0.396 msecs
[ 1903.369406] usb usb1: root hub lost power or was reset
[ 1903.369430] usb usb3: root hub lost power or was reset
[ 1903.369432] usb usb4: root hub lost power or was reset
[ 1903.369472] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[ 1903.369486] usb usb2: root hub lost power or was reset
[ 1903.369560] ath: phy0: ASPM enabled: 0x42
[ 1903.370035] r8169 0000:04:00.2: System wakeup disabled by ACPI
[ 1903.370373] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 1903.373308] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1903.373396] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1903.373519] sd 0:0:0:0: [sda] Starting disk
[ 1903.373707] mei_me 0000:00:16.0: FW not ready: resetting.
[ 1903.373750] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106 
[ 1903.454924] r8169 0000:04:00.2 enp4s0f2: link down
[ 1903.500893] nouveau 0000:01:00.0: DRM: resuming client object trees...
[ 1903.691753] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1903.694068] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1903.694071] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1903.696093] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1903.696096] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1903.696848] ata3.00: configured for UDMA/100
[ 1903.699753] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1903.703759] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[ 1903.703762] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 1903.710422] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1903.711558] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1903.711561] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1903.721340] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1903.722536] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1903.722539] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1903.727946] ata1.00: configured for UDMA/133
[ 1904.115729] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
[ 1904.244276] PM: resume of devices complete after 875.105 msecs
[ 1904.244617] PM: Finishing wakeup.
[ 1904.244619] Restarting tasks ... done.
[ 1904.315684] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
[ 1904.398181] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1904.409914] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
[ 1904.409917] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1904.409919] usb 1-1.1: Product: Bluetooth USB Host Controller
[ 1904.409921] usb 1-1.1: Manufacturer: Atheros Communications
[ 1904.409922] usb 1-1.1: SerialNumber: Alaska Day 2006
[ 1904.416252] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1904.417249] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready
[ 1904.502630] r8169 0000:04:00.2 enp4s0f2: link down
[ 1904.502695] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready
[ 1904.549004] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1904.657804] usb 1-1.1: USB disconnect, device number 5
[ 1904.855645] usb 1-1.1: new full-speed USB device number 6 using ehci-pci
[ 1905.540874] wlp3s0: authenticate with 74:44:01:31:82:6d
[ 1905.555155] wlp3s0: send auth to 74:44:01:31:82:6d (try 1/3)
[ 1905.557111] wlp3s0: authenticated
[ 1905.559536] wlp3s0: associate with 74:44:01:31:82:6d (try 1/3)
[ 1905.563391] wlp3s0: RX AssocResp from 74:44:01:31:82:6d (capab=0x411 status=0 aid=6)
[ 1905.563480] wlp3s0: associated
[ 1905.563512] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 1909.587325] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 1909.587503] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 1909.587644] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 1909.587650] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 1909.587694] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 1909.588020] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 1909.949170] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
[ 1909.949173] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1909.949175] usb 1-1.1: Product: Bluetooth USB Host Controller
[ 1909.949176] usb 1-1.1: Manufacturer: Atheros Communications
[ 1909.949177] usb 1-1.1: SerialNumber: Alaska Day 2006
virtualbox 16.04 vagrant Mathieu Dumoulin
sumber
Anda tidak menggunakan paket ekstensi yang perlu ditingkatkan, bukan? Saya melakukan hal yang sama persis (versi bijaksana) dan gagal memulai sampai saya ingat bahwa saya belum memperbarui paket ekstensi, setelah itu lancar berlayar.
Dennis
Saya menggunakan penyedia gelandangan-aws tetapi secara teknis tidak, tidak ada yang digunakan. Saya seharusnya menginstalnya menggunakan sudo apt-get install virtualbox dan itu ut
Mathieu Dumoulin
Bisakah Anda memasukkan outputnya dmesg? Hanya item yang terjadi dalam 10 detik setelah menjalankan sudo modprobe vbxdrv(jalankan dmesgsebelum dan sesudah dan hanya menyertakan entri baru di akhir). Output uname -adan modinfo vboxdrvakan membantu juga.
David Foerster
"DEB online" apa yang Anda gunakan, dan apa yang terjadi ketika Anda menginstalnya?
fkraiem
@ fkraiem Deb online adalah AMD64 untuk Ubuntu 16 dari halaman unduhan VirtualBox yang mungkin yang diinstal secara default!
Mathieu Dumoulin

Jawaban:

17

Saya menemukan jawabannya, itu adalah boot aman yang dipasang oleh Ubuntu saat meningkatkan. Instruksi tidak jelas tentang cara menghapus hal boot aman itu tetapi saya berhasil melakukannya.

  1. Nyalakan kembali komputer Anda setelah menginstal driver DKMS untuk VBOX
  2. Anda akan diminta dengan layar biru dengan 2 opsi: tunggu atau ubah pengaturan MDK
  3. Memilih mengubah pengaturan MDK dan memasukkan karakter kata sandi seperti yang diminta, Anda harus menekan tombol yang sesuai dengan indeks karakter yang diminta dan kemudian tekan ENTER.
  4. Setelah memasukkan 2 atau 3 karakter, mereka akan bertanya apakah Anda ingin menghapus boot aman, katakan ya!
  5. Komputer akan restart, setelah Anda kembali itu akan berfungsi!
Mathieu Dumoulin
sumber
2
Layar biru hanya muncul selama reboot pertama setelah memutakhirkan ke Ubuntu 16.04. Jadi jika Anda mengalami masalah setelah Anda melewatkan opsi layar biru (boot aman), Anda dapat memasukkan pengaturan boot aman secara manual dengan memasukkan pengaturan BIOS Anda. Opsi boot aman dapat ditemukan di bawah menu "Keamanan" pada BIOS. Cukup ubah dari "Diaktifkan" ke "Nonaktif" di pengaturan BIOS. * Saya ingin tahu fungsionalitas mana yang dinonaktifkan setelah menonaktifkan opsi boot aman. Apakah ada opsi untuk menginstal masing-masing sertifikat boot aman untuk mendukung VirtualBox tanpa menonaktifkan boot aman?
ElazarR
Akhirnya!!!! Saya menemukan 10 ribu pertanyaan tentang masalah ini, tetapi tidak ada yang bisa melakukannya.
George
1

Saya memiliki masalah yang sama ketika memperbarui ke Ubuntu 16.04 dan menemukan pesan kesalahan berikut:

Starting VirtualBox kernel modules ...failed!
  (modprobe vboxdrv failed. Please use 'dmesg' to find out why)

Itu juga disebabkan oleh boot UEFI. Solusinya cukup sederhana:

  1. Nyalakan ulang mesin Anda dan masuk ke Menu BIOS (Dalam kasus saya, menekan F2)

  2. Cari Boot Aman dan ubah ke Legacy

    Di motherboard ASUS:

    • Pergi ke Mode Lanjut (F7)
    • Masuk ke opsi Boot Aman di bawah bagian Boot
    • Ubah "mode Windows UEFI" dengan "OS Lainnya"
    • Simpan dan mulai ulang untuk menerapkan pengaturan (F10)

  3. Setelah memulai kembali pastikan driver dimuat

Tipe:

sudo /sbin/rcvboxdrv setup

Dan Anda harus mendapatkannya

Stopping VirtualBox kernel modules ...done.
Uninstalling old VirtualBox DKMS kernel modules ...done.
Trying to register the VirtualBox kernel modules using DKMS ...done.
Starting VirtualBox kernel modules ...done.
Sputnik
sumber
Sama di sini, dmesgpesan " periksa" awal kadang-kadang menyesatkan, karena tidak perlu ada kesalahan atau pesan di sana, yang memberi tahu Anda tentang masalahnya.
Zelphir Kaltstahl