Ketika saya mencoba memonitor bandwidth internet saya dengan nethogs
$ sudo nethogs eth0
Saya mendapat kesalahan berikut:
ioctl failed while establishing local IP for selected device eth0.
You may specify the device on the command line.
Ini adalah output dari sudo ip addr
:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen1000 link/ether 20:6a:8a:5d:5d:1c brd ff:ff:ff:ff:ff:ff
3: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1400 qdisc pfifo_fast state UNKNOWNqlen 1000
link/ether 56:10:e4:e0:61:f1 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.10/24 brd 192.168.1.255 scope global usb0
inet6 fe80::5410:e4ff:fee0:61f1/64 scope link
valid_lft forever preferred_lft forever
4: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 20:7c:8f:79:88:ab brd ff:ff:ff:ff:ff:ff
networking
network-monitoring
Kawanan
sumber
sumber
sudo nethogs eth1
untuk saya.usb0
diganti namanya menjadiwlp6s0
.ifconfig
dan kemudian menggunakannya dengansudo nethogs <HERE>