Informasi Monitor Replikasi menggunakan T-SQL

Jawaban:

18

Setelah melakukan pencarian online, saya menemukan apa yang Anda butuhkan, semoga jawaban saya membantu Anda.

jawaban 1

catatan:

Ini Hanya bekerja dengan replikasi peer to peer transaksional dan transaksional

Skrip T-SQL yang dapat Anda gunakan untuk memantau status replikasi transaksional dan kinerja publikasi dan langganan.

Hal-hal yang harus dipertimbangkan sebelum menjalankan skrip di bawah ini

Membutuhkan izin pada tabel berikut di dalam distribusi dan database master

  • MSdistribution_status
  • MSdistribution_agents
  • Artikel Kecil
  • MSreplication_monitordata
  • MSdistribution_history
  • server
    USE [distribution]

    IF OBJECT_ID('Tempdb.dbo.#ReplStats') IS NOT NULL  
    DROP TABLE #ReplStats 

    CREATE TABLE [dbo].[#ReplStats](
    [DistributionAgentName] [nvarchar](100) NOT NULL,
    [DistributionAgentStartTime] [datetime] NOT NULL,
    [DistributionAgentRunningDurationInSeconds] [int] NOT NULL,
    [IsAgentRunning] [bit] NULL,
    [ReplicationStatus] [varchar](14) NULL,
    [LastSynchronized] [datetime] NOT NULL,
    [Comments] [nvarchar](max) NOT NULL,
    [Publisher] [sysname] NOT NULL,
    [PublicationName] [sysname] NOT NULL,
    [PublisherDB] [sysname] NOT NULL,
    [Subscriber] [nvarchar](128) NULL,
    [SubscriberDB] [sysname] NULL,
    [SubscriptionType] [varchar](64) NULL,
    [DistributionDB] [sysname] NULL,
    [Article] [sysname] NOT NULL,
    [UndelivCmdsInDistDB] [int] NULL,
    [DelivCmdsInDistDB] [int] NULL,
    [CurrentSessionDeliveryRate] [float] NOT NULL,
    [CurrentSessionDeliveryLatency] [int] NOT NULL,
    [TotalTransactionsDeliveredInCurrentSession] [int] NOT NULL,
    [TotalCommandsDeliveredInCurrentSession] [int] NOT NULL,
    [AverageCommandsDeliveredInCurrentSession] [int] NOT NULL,
    [DeliveryRate] [float] NOT NULL,
    [DeliveryLatency] [int] NOT NULL,
    [TotalCommandsDeliveredSinceSubscriptionSetup] [int] NOT NULL,
    [SequenceNumber] [varbinary](16) NULL,
    [LastDistributerSync] [datetime] NULL,
    [Retention] [int] NULL,
    [WorstLatency] [int] NULL,
    [BestLatency] [int] NULL,
    [AverageLatency] [int] NULL,
    [CurrentLatency] [int] NULL
    ) ON [PRIMARY]


    INSERT INTO #ReplStats 
    SELECT da.[name] AS [DistributionAgentName]
    ,dh.[start_time] AS [DistributionAgentStartTime]
    ,dh.[duration] AS [DistributionAgentRunningDurationInSeconds]
    ,md.[isagentrunningnow] AS [IsAgentRunning]
    ,CASE md.[status]
    WHEN 1 THEN '1 - Started'
    WHEN 2 THEN '2 - Succeeded'
    WHEN 3 THEN '3 - InProgress'
    WHEN 4 THEN '4 - Idle'
    WHEN 5 THEN '5 - Retrying'
    WHEN 6 THEN '6 - Failed'
    END AS [ReplicationStatus]
    ,dh.[time] AS [LastSynchronized]
    ,dh.[comments] AS [Comments]
    ,md.[publisher] AS [Publisher]
    ,da.[publication] AS [PublicationName]
    ,da.[publisher_db] AS [PublisherDB]
    ,CASE 
    WHEN da.[anonymous_subid] IS NOT NULL 
    THEN UPPER(da.[subscriber_name])
    ELSE UPPER (s.[name]) END AS [Subscriber]
    ,da.[subscriber_db] AS [SubscriberDB]
    ,CASE da.[subscription_type]
    WHEN '0' THEN 'Push'  
    WHEN '1' THEN 'Pull'  
    WHEN '2' THEN 'Anonymous'  
    ELSE CAST(da.[subscription_type] AS [varchar](64)) END AS [SubscriptionType]
    ,md.[distdb] AS [DistributionDB]
    ,ma.[article]    AS [Article]
    ,ds.[UndelivCmdsInDistDB] 
    ,ds.[DelivCmdsInDistDB]
    ,dh.[current_delivery_rate] AS [CurrentSessionDeliveryRate]
    ,dh.[current_delivery_latency] AS [CurrentSessionDeliveryLatency]
    ,dh.[delivered_transactions] AS [TotalTransactionsDeliveredInCurrentSession]
    ,dh.[delivered_commands] AS [TotalCommandsDeliveredInCurrentSession]
    ,dh.[average_commands] AS [AverageCommandsDeliveredInCurrentSession]
    ,dh.[delivery_rate] AS [DeliveryRate]
    ,dh.[delivery_latency] AS [DeliveryLatency]
    ,dh.[total_delivered_commands] AS [TotalCommandsDeliveredSinceSubscriptionSetup]
    ,dh.[xact_seqno] AS [SequenceNumber]
    ,md.[last_distsync] AS [LastDistributerSync]
    ,md.[retention] AS [Retention]
    ,md.[worst_latency] AS [WorstLatency]
    ,md.[best_latency] AS [BestLatency]
    ,md.[avg_latency] AS [AverageLatency]
    ,md.[cur_latency] AS [CurrentLatency]
    FROM [distribution]..[MSdistribution_status] ds 
    INNER JOIN [distribution]..[MSdistribution_agents] da
    ON da.[id] = ds.[agent_id]                          
    INNER JOIN [distribution]..[MSArticles] ma 
    ON ma.publisher_id = da.publisher_id 
    AND ma.[article_id] = ds.[article_id]
    INNER JOIN [distribution]..[MSreplication_monitordata] md
    ON [md].[job_id] = da.[job_id]
    INNER JOIN [distribution]..[MSdistribution_history] dh
    ON [dh].[agent_id] = md.[agent_id] 
    AND md.[agent_type] = 3
    INNER JOIN [master].[sys].[servers]  s
    ON s.[server_id] = da.[subscriber_id] 
    --Created WHEN your publication has the immediate_sync property set to true. This property dictates 
    --whether snapshot is available all the time for new subscriptions to be initialized. 
    --This affects the cleanup behavior of transactional replication. If this property is set to true, 
    --the transactions will be retained for max retention period instead of it getting cleaned up
    --as soon as all the subscriptions got the change. 
    WHERE da.[subscriber_db] <> 'virtual' 
    AND da.[anonymous_subid] IS NULL
    AND dh.[start_time] = (SELECT TOP 1 start_time
                    FROM [distribution]..[MSdistribution_history] a
                    JOIN [distribution]..[MSdistribution_agents] b
                    ON a.[agent_id] = b.[id] AND b.[subscriber_db] <> 'virtual'
                    WHERE [runstatus] <> 1
                    ORDER BY [start_time] DESC)
    AND dh.[runstatus] <> 1

    SELECT 'Transactional Replication Summary' AS [Comments];
    SELECT [DistributionAgentName]
    ,[DistributionAgentStartTime]
    ,[DistributionAgentRunningDurationInSeconds]
    ,[IsAgentRunning]
    ,[ReplicationStatus]
    ,[LastSynchronized]
    ,[Comments]
    ,[Publisher]
    ,[PublicationName]
    ,[PublisherDB]
    ,[Subscriber]
    ,[SubscriberDB]
    ,[SubscriptionType]
    ,[DistributionDB]
    ,SUM([UndelivCmdsInDistDB]) AS [UndelivCmdsInDistDB]
    ,SUM([DelivCmdsInDistDB]) AS [DelivCmdsInDistDB]
    ,[CurrentSessionDeliveryRate]
    ,[CurrentSessionDeliveryLatency]
    ,[TotalTransactionsDeliveredInCurrentSession]
    ,[TotalCommandsDeliveredInCurrentSession]
    ,[AverageCommandsDeliveredInCurrentSession]
    ,[DeliveryRate]
    ,[DeliveryLatency]
    ,[TotalCommandsDeliveredSinceSubscriptionSetup]
    ,[SequenceNumber]
    ,[LastDistributerSync]
    ,[Retention]
    ,[WorstLatency]
    ,[BestLatency]
    ,[AverageLatency]
    ,[CurrentLatency]
    FROM #ReplStats
    GROUP BY [DistributionAgentName]
    ,[DistributionAgentStartTime]
    ,[DistributionAgentRunningDurationInSeconds]
    ,[IsAgentRunning]
    ,[ReplicationStatus]
    ,[LastSynchronized]
    ,[Comments]
    ,[Publisher]
    ,[PublicationName]
    ,[PublisherDB]
    ,[Subscriber]
    ,[SubscriberDB]
    ,[SubscriptionType]
    ,[DistributionDB]
    ,[CurrentSessionDeliveryRate]
    ,[CurrentSessionDeliveryLatency]
    ,[TotalTransactionsDeliveredInCurrentSession]
    ,[TotalCommandsDeliveredInCurrentSession]
    ,[AverageCommandsDeliveredInCurrentSession]
    ,[DeliveryRate]
    ,[DeliveryLatency]
    ,[TotalCommandsDeliveredSinceSubscriptionSetup]
    ,[SequenceNumber]
    ,[LastDistributerSync]
    ,[Retention]
    ,[WorstLatency]
    ,[BestLatency]
    ,[AverageLatency]
    ,[CurrentLatency]

    SELECT 'Transactional Replication Summary Details' AS [Comments];
    SELECT [Publisher]
    ,[PublicationName]
    ,[PublisherDB]
    ,[Article]
    ,[Subscriber]
    ,[SubscriberDB]
    ,[SubscriptionType]
    ,[DistributionDB]
    ,SUM([UndelivCmdsInDistDB]) AS [UndelivCmdsInDistDB]
    ,SUM([DelivCmdsInDistDB]) AS [DelivCmdsInDistDB]
    FROM #ReplStats
    GROUP BY [Publisher]
    ,[PublicationName]
    ,[PublisherDB]
    ,[Article]
    ,[Subscriber]
    ,[SubscriberDB]
    ,[SubscriptionType]
    ,[DistributionDB]

Jawaban 2

Script_2 ditemukan di MSDN

    --First you find the distributor servername using the below running in publisher
    Use master
    EXEC sp_helpdistributor;

    --Then you can run the below to find the type (use distributor database)

    SELECT 
    (CASE  
    WHEN mdh.runstatus =  '1' THEN 'Start - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '2' THEN 'Succeed - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '3' THEN 'InProgress - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '4' THEN 'Idle - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '5' THEN 'Retry - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '6' THEN 'Fail - '+cast(mdh.runstatus as varchar)
    ELSE CAST(mdh.runstatus AS VARCHAR)
    END) [Run Status], 
    mda.subscriber_db [Subscriber DB], 
    mda.publication [PUB Name],
    CONVERT(VARCHAR(25),mdh.[time]) [LastSynchronized],
    und.UndelivCmdsInDistDB [UndistCom], 
    mdh.comments [Comments], 
    'select * from distribution.dbo.msrepl_errors (nolock) where id = ' + CAST(mdh.error_id AS VARCHAR(8)) [Query More Info],
    mdh.xact_seqno [SEQ_NO],
    (CASE  
    WHEN mda.subscription_type =  '0' THEN 'Push' 
    WHEN mda.subscription_type =  '1' THEN 'Pull' 
    WHEN mda.subscription_type =  '2' THEN 'Anonymous' 
    ELSE CAST(mda.subscription_type AS VARCHAR)
    END) [SUB Type],

    mda.publisher_db+' - '+CAST(mda.publisher_database_id as varchar) [Publisher DB],
    mda.name [Pub - DB - Publication - SUB - AgentID]
    FROM distribution.dbo.MSdistribution_agents mda 
    LEFT JOIN distribution.dbo.MSdistribution_history mdh ON mdh.agent_id = mda.id 
    JOIN 
    (SELECT s.agent_id, MaxAgentValue.[time], SUM(CASE WHEN xact_seqno > MaxAgentValue.maxseq THEN 1 ELSE 0 END) AS UndelivCmdsInDistDB 
    FROM distribution.dbo.MSrepl_commands t (NOLOCK)  
    JOIN distribution.dbo.MSsubscriptions AS s (NOLOCK) ON (t.article_id = s.article_id AND t.publisher_database_id=s.publisher_database_id ) 
    JOIN 
    (SELECT hist.agent_id, MAX(hist.[time]) AS [time], h.maxseq  
    FROM distribution.dbo.MSdistribution_history hist (NOLOCK) 
    JOIN (SELECT agent_id,ISNULL(MAX(xact_seqno),0x0) AS maxseq 
    FROM distribution.dbo.MSdistribution_history (NOLOCK)  
    GROUP BY agent_id) AS h  
    ON (hist.agent_id=h.agent_id AND h.maxseq=hist.xact_seqno) 
    GROUP BY hist.agent_id, h.maxseq 
    ) AS MaxAgentValue 
    ON MaxAgentValue.agent_id = s.agent_id 
    GROUP BY s.agent_id, MaxAgentValue.[time] 
    ) und 
    ON mda.id = und.agent_id AND und.[time] = mdh.[time] 
    where mda.subscriber_db<>'virtual' -- created when your publication has the immediate_sync property set to true. This property dictates whether snapshot is available all the time for new subscriptions to be initialized. This affects the cleanup behavior of transactional replication. If this property is set to true, the transactions will be retained for max retention period instead of it getting cleaned up as soon as all the subscriptions got the change.
    --and mdh.runstatus='6' --Fail
    --and mdh.runstatus<>'2' --Succeed
    order by mdh.[time]

Jawaban 3

Skrip ditampilkan di SimpleTalk TSQL sebagai pekerjaan agen.

Langkah 1

Buat di basis data DBA yang diinstal pada server pelanggan. Kode untuk membuat tabel adalah:

CREATE TABLE dbo.Replication_Qu_History(
            Subscriber_db varchar(50) NOT NULL,
            Records_In_Que numeric(18, 0) NULL,
            CatchUpTime numeric(18, 0) NULL,
            LogDate datetime NOT NULL,
        CONSTRAINT PK_EPR_Replication_Que_History PRIMARY KEY CLUSTERED
    (
            Subscriber_db ASC, LogDate DESC
    ) ON PRIMARY
    GO

Skrip 1

Data dalam tabel ini diisi oleh prosedur pemantauan dan memberikan konteks historis untuk memeriksa masalah. Tetapi untuk memantau apa yang terjadi saat ini lebih banyak diperlukan.

Ada tiga hal yang membantu menentukan kesehatan replikasi.

  • Status pekerjaan terkait replikasi
  • Latensi (terutama latensi distribusi) yang diukur oleh penghitung Dist: Delivery Latency

  • Jumlah perintah luar biasa yang tertunda untuk berlangganan

    DECLARE @cmd NVARCHAR(max)
DECLARE @publisher SYSNAME, @publisher_db SYSNAME, @publication SYSNAME, @pubtype INT
DECLARE @subscriber SYSNAME, @subscriber_db SYSNAME, @subtype INT
DECLARE @cmdcount INT, @processtime INT
DECLARE @ParmDefinition NVARCHAR(500)
DECLARE @JobName SYSNAME
DECLARE @minutes INT, @threshold INT, @maxCommands INT, @mail CHAR(1) = 'N'
SET @minutes = 60 --> Define how many minutes latency before you would like to be notified
SET @maxCommands = 80000  --->  change this to represent the max number of outstanding commands to be proceduresed before notification
SET @threshold = @minutes * 60

SELECT * INTO #PublisherInfo
FROM OPENROWSET('SQLOLEDB', 'SERVER=(LOCAL);TRUSTED_CONNECTION=YES;'
, 'SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelppublisher')

SELECT @publisher = publisher FROM #PublisherInfo     

SET @cmd = 'SELECT * INTO ##PublicationInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelppublication @publisher='
+ @publisher + ''')'
--select @cmd
EXEC sp_executesql @cmd

SELECT @publisher_db=publisher_db, @publication=publication, @pubtype=publication_type  FROM ##PublicationInfo

SET @cmd = 'SELECT * INTO ##SubscriptionInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelpsubscription @publisher='
+ @publisher + ',@publication_type=' + CONVERT(CHAR(1),@pubtype) + ''')'
--select @cmd
EXEC sp_executesql @cmd


ALTER TABLE ##SubscriptionInfo
ADD  PendingCmdCount INT NULL,
EstimatedProcessTime INT NULL

    Untuk memeriksa status pekerjaan distribusi

    DECLARE cur_sub CURSOR READ_ONLY FOR
SELECT @publisher, s.publisher_db, s.publication, s.subscriber, s.subscriber_db, s.subtype, s.distribution_agentname
FROM ##SubscriptionInfo s

OPEN cur_sub  
FETCH NEXT FROM cur_sub INTO @publisher, @publisher_db, @publication, @subscriber, @subscriber_db, @subtype, @JobName

WHILE @@FETCH_STATUS = 0  
BEGIN  
SET @cmd = 'SELECT @cmdcount=pendingcmdcount, @processtime=estimatedprocesstime FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorsubscriptionpendingcmds @publisher=' + @publisher
+ ',@publisher_db=' + @publisher_db + ',@publication=' + @publication
+ ',@subscriber=' + @subscriber + ',@subscriber_db=' + @subscriber_db
+ ',@subscription_type=' + CONVERT(CHAR(1),@subtype) + ';' + ''')'
SET @ParmDefinition = N'@cmdcount INT OUTPUT,
@processtime INT OUTPUT'
--select @cmd
EXEC sp_executesql @cmd,@ParmDefinition,@cmdcount OUTPUT, @processtime OUTPUT

UPDATE ##SubscriptionInfo
SET PendingCmdCount = @cmdcount
, EstimatedProcessTime = @processtime
WHERE subscriber_db = @subscriber_db

INSERT INTO DBA.dbo.Replication_Que_History
VALUES(@subscriber_db, @cmdcount, @processtime, GETDATE())
--  find out if the distribution job with the high number of outstanding commands running or not
--  if it is running then sometimes stopping and starting the agent fixes the issue
IF EXISTS(SELECT * FROM tempdb.INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME LIKE '##JobInfo%')
DROP TABLE ##JobInfo

SET @cmd = 'SELECT * INTO ##JobInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
,''SET FMTONLY OFF EXEC msdb.dbo.sp_help_job @job_name='''''
+ @JobName + ''''',@job_aspect=''''JOB'''''')'
EXEC sp_executesql @cmd

IF @cmdcount > @maxCommands OR (@processtime > @threshold AND @cmdcount > 0)
BEGIN
IF (SELECT current_execution_status FROM ##JobInfo) = 1 --  This means job is currently executing so stop/start it
BEGIN
EXEC distribution.dbo.sp_MSstopdistribution_agent
@publisher = @publisher
, @publisher_db = @publisher_db
, @publication = @publication
, @subscriber = @subscriber
, @subscriber_db = @subscriber_db
WAITFOR DELAY '00:00:05' ---- 5 Second Delay
SET @mail = 'Y' 
END
END   
--SELECT name, current_execution_status FROM ##JobInfo
IF (SELECT current_execution_status FROM ##JobInfo) <> 1 -- if the job is not running start it
BEGIN
EXEC distribution.dbo.sp_MSstartdistribution_agent
@publisher = @publisher
, @publisher_db = @publisher_db
, @publication = @publication
, @subscriber = @subscriber
, @subscriber_db = @subscriber_db
SET @mail = 'Y'      -- Send email if job has stopped and needed to be restarted
END   
DROP TABLE ##JobInfo
FETCH NEXT FROM cur_sub INTO @publisher, @publisher_db, @publication, @subscriber, @subscriber_db, @subtype, @JobName
END  

CLOSE cur_sub  
DEALLOCATE cur_sub

    Jalankan prosedur yang disediakan Microsoft sp_replmonitorsubscriptionpendingcmds

    --system stored procedure to run in distribution database
execute sp_replmonitorsubscriptionpendingcmds
--replication publisher server
@publisher ='PubServer',
--replication publisher database
@publisher_db = 'ProdDBPub',
--replication publication name
@publication ='ProdDBSub',
--replication subscriber server
@subscriber ='SubServer',
--replication subscriber database
@subscriber_db ='ProdDBSub1',
--choose type of subscription you have
@subscription_type ='1' --0 for push and 1 for pull
GO

Kode di bawah ini mengharuskan opsi konfigurasi server Ad Hoc Distributed Queries diaktifkan. Di sini saya membuat email yang akan dikirim dengan asumsi Script 3 sebelumnya menemukan masalah sp_replmonitorsubscriptionpendingcmds.

        IF @mail = 'Y'
        BEGIN
        DECLARE @msg VARCHAR(MAX) = 'Replication on ' + @@SERVERNAME
        + ' may be experiencing some problems.  Attempts to restart the distribution agent have been made. '
        + 'If this is not the first message like this that you have received within the last hour, please investigate.'
        DECLARE @body NVARCHAR(MAX)
        DECLARE @xml1 NVARCHAR(MAX)
        DECLARE @tab1 NVARCHAR(MAX)
        DECLARE @xml2 NVARCHAR(MAX)
        DECLARE @tab2 NVARCHAR(MAX)

        SET @xml1 = CAST(( SELECT subscriber AS 'td','',subscriber_db AS 'td','',
        latency AS 'td','', PendingCmdCount AS 'td','', EstimatedProcessTime AS 'td'
        FROM  ##SubscriptionInfo s
        FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX))

        SET @tab1 ='<html><body><H4>Subscription Information </H4>
        <table border = 1> <tr>
        <th> Subscriber </th> <th> Subscriber Database </th> <th> Latency(seconds)</th>
        <th> Undistributed Commands </th> <th> Estimated Catch Up Time</th></tr>'   
        --  this command gives us the last 10 measurements of latency for each subscriber
        SET @xml2 = CAST(( SELECT s.Subscriber_db AS 'td','', s.Records_In_Que AS 'td','', s.CatchUpTime AS 'td','', CONVERT(CHAR(22),LogDate, 100) AS 'td'
        FROM (SELECT ROW_NUMBER() OVER ( PARTITION BY subscriber_db ORDER BY Logdate DESC ) AS 'RowNumber',
        subscriber_db
        , Records_In_Que
        , CatchUpTime
        , Logdate
        FROM DBA.dbo.Replication_Que_History
        ) s
        WHERE RowNumber <= 8
        FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX))

        SET @tab2 ='<br><br><H4>Historical Latency Information </H4>
        <table border = 1>
        <tr>
        <th>Subscriber</th> <th>Undistributed Commands</th> <th> Catch Up Time </th> <th> Date\Time </th></tr>'

        SET @body = @msg + @tab1 + @xml1 + '</table>'
        + @tab2 + @xml2 + '</body></html>'

        DECLARE @to NVARCHAR(200)
        SELECT @to = '' -- INSERT YOUR EMAIL ADDRESS HERE
        EXEC msdb.dbo.sp_send_dbmail
        @body = @body,
        @body_format ='HTML',
        @recipients = @to,
        @subject = 'Possible Replication Problem' ;
        END
        DROP TABLE #PublisherInfo
        DROP TABLE ##PublicationInfo
        DROP TABLE ##SubscriptionInfo

Proses terakhir adalah menghapus baris dari tabel status replikasi secara berkala sehingga data tidak menjadi basi

DECLARE @delDate datetime = getdate()-10
  DELETE FROM DBA.dbo.Replication_Que_History
  WHERE LogDate < @deldate

Tolong juga pertimbangkan saya juga mencatat bahwa Ada masalah dengan sp_replmonitorsubscriptionpendingcmds jika Anda masih dengan SQL Server 2005 dan 2008 Microsoft Connect

Jika salah satu dari jawaban di atas tidak jelas, Anda dapat mengikuti sumber yang saya berikan

Terima kasih!

Heisenberg
sumber
1
ini orang emas !!! hebat!
Marcello Miorelli
1
@marcelomiorelli Tidak prb & Terima kasih! Karena komunitas ini selalu saling membantu :)
Heisenberg
2
Saya tidak tahu mengapa ini hanya memiliki satu upvote, memiliki lebih banyak.
ConstantineK
3

Anda bisa mendapatkan informasi yang Anda butuhkan dengan menanyakan tabel dbo.MSReplication_monitordata dari database distribusi dengan skrip ini, untuk semua publikasi:

USE distribution
SELECT status AS ReplicationAgentsStatus 
FROM dbo.MSReplication_monitordata
WHERE publication = 'ALL'

Untuk publikasi tertentu, modifikasi 'SEMUA' dalam pernyataan WHERE

Anda juga dapat menggunakan skrip powershell ini untuk memfilter kolom status dari prosedur tersimpan sistem sp_replmonitorhelppublication:

Invoke-Sqlcmd -Query "USE distribution
EXEC sp_replmonitorhelppublication" -ServerInstance "TIKVICKI" | Out-File d:\temp1.txt


Get-Content d:\temp1.txt | where { $_.Contains("status : ") } | 
out-file d:\temp2.txt


(Get-Content d:\temp2.txt).replace('status ', 'Replication agents 
status') | 
Set-Content d:\Replication_Agents_Status_$(get-date -f yyyy-MM-dd-hh-mm-ss).txt

Remove-Item d:\temp1.txt -Force
Remove-Item d:\temp2.txt -Force

Saya menemukan skrip ini di artikel ini , yang juga menjelaskan cara melakukan ini melalui UI dengan alat pihak ketiga atau SSMS.

Mspaja
sumber